KDF(Kick-Down-Feeling) shall be attached on the bootm plate of the pedal to give an physical feeling to the driver foot when he wish to work an incident acceleration. There are several numbers of different forces of springs to meet drivers' demand. KDS(Kick-Down-Switch) shall be prepared inside sensor.
Application:- Astronics, ZF Automatated transmission
 

Change Over Box is a converting device for an accelerator pedal designed to control PTO of electric engine (E-3) installed in a vehicle. It converts the input of Engine ECU by selecting the accelerator pedal signal installed to the driver’s seat, and Remote RPM Controller installed at the rear side, as ECU input signal lines. By connecting the power switch of the additionally installed power input box for the use of PTO Hydraulic converter parallel in common status, it uses the C/O Box system as the starting switch of C/O Box. When the power of PTO Hydraulic convertor is switched off, the pedal at the driver’s seat is activated. And when the power is on, the pedal at the driver’s seat is unusable while RPM is adjusted by the rear remote accelerator device (accelerator pedal or accelerator hand-switch or switch for a remote controller).